ZINSSER® BULLS EYE 1-2-3 Base D BX/2.5L
ZINSSER® BULLS EYE 1-2-3 Base D BX/2.5L is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
ZINSSER® BULLS EYE 1-2-3 Base D BX/2.5L
ZINSSER® BULLS EYE 1-2-3 Base D BX/2.5L
- Seals stains of graffiti, grease, rust, cedar & redwood tannin
- Rust inhibitive coating, ideal for new metal
- Adheres to most surfaces without pre-sanding or deglossing
- Fast drying
- White and pastel shades
Universal acrylic water-based stain blocking sealer and adhesion primer.
DESCRIPTION
Universal acrylic water based stain blocking sealer and adhesion primer.
RECOMMENDED USE
Product can be applied on interior and exterior walls, ceilings, doors, trim, foundations, railings, and related paintable surfaces. Bulls Eye 1-2-3 adheres on wood, plaster, concrete, gloss enamels, hardboard, glass and tiles. The product provides a rust inhibitive coating on iron railings, steel frames, piping, etc. Resists the growth of mould and mildew on dried film in damp, humid environments. Resistant to high pH surfaces (up to 12,5) including; plaster, poured concrete, concrete block and stucco. Seals porous surfaces and traps most stains in the primer film (graffiti, grease, rust, cedar & redwood tannin, creosote and asphalt stains). Some stains may require a second coat. Interior Substrates: new or previously painted drywall, cured plaster, cement, poured concrete, concrete block, stucco, wood (pine, fir, birch, oak and plywood), aluminum, iron, steel and galvanized metal, PVC, glossy laminates and other interior surfaces. Exterior Substrates: recommended for all types of wood (new or previously painted pine, cedar, redwood, plywood and pressure treated wood), hardboard, metal (aluminium, steel, iron and galvanized metal), PVC, fiberglass, masonry (stucco, concrete block, poured concrete and brick).
TECHNICAL DATA
- Density (g/cm³): 1,26
- Gloss Level: Satin
- Gloss level at 60º: Satin: 23%
- Solids Content in weight: 50,5%
- Solids content in volume: 34%
DRY TIMES BY 20º C/RH 50%
- Touch dry: 30 minutes
- Dry to recoat: 1 h
- Fully cured: 7 days
RECOMMENDED WET FILM THICKNESS
80 - 110 µm
RECOMMENDED DRY FILM THICKNESS
30 - 40 µm
THEORETICAL CONSUMPTION
9 - 12 m²/l
PRACTICAL CONSUMPTION
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
SURFACE PREPARATION
Surfaces should be clean, dry, sound and free of dust, dirt, excessive chalky material, grime, grease, oil, wax, mildew, wallpaper adhesive or any contamination that may interfere with adhesion. If unsure, always wash surface with a household ammonia and water solution, or an appropriate cleaning solution. Remove any unsoundly adhered coatings. Sand any remaining paint film edges smooth with the surface. Lightly sand exposed exterior wood with 80 to 100 grit sandpaper to remove loose or weathered wood fibres. Attempt to remove existing stains by washing, sanding, scraping, etc. Kill mildew with a suitable mildew Killer such as Rust-Oleum FK 111. Remove rust and clean metal and new galvanized substrates with a suitable cleaner such as Rust-Oleum ND14. On wood first spot prime knots with Zinsser® B-I-N Primer-Sealer before priming full surface with Bulls Eye 1-2-3.
DIRECTIONS FOR USE
Stir thoroughly before and during application.
APPLICATION CONDITIONS
Apply when air and surface temperature is between 10 and 32ºC and relative humidity is between 10 and 70%. Substrate moisture content should not exceed 12%.
APPLICATION & THINNING: BRUSH
Use nylon, polyester or synthetic brush. Do not dilute.
APPLICATION & THINNING: ROLLER
Use nylon, polyester or synthetic roller. Do not dilute.
APPLICATION & THINNING: AIRLESS SPRAY
Tip size: 0,015 - 0,017 inch. Fluid pressure: 140 - 175 bar. Do not dilute.
APPLICATION & THINNING: AIR-ATOMISED SPRAY
Dilute with max 10% water. Atomizing pressure: 2 - 4 bar.
CLEANING OF EQUIPMENT / SPILLS
(Warm) water. If dried on tools, let soak overnight in a 1:4 ammonia and water solution
REMARKS
Bulls Eye 1-2-3 is not intended for blocking heavy water-stains or for application to floors, decks, roof surfaces or any surface subject to immersion or prolonged contact with water. Bulls Eye® 1-2-3 can be tinted withBulls Eye® 1-2-3 can be tinted with max. 16 ml of universal color paste per liter.
SAFETY DATA
- VOC level: 4 g/l
- VOC readymix: 4 g/l
- VOC category: A/g
- VOC limit: 30 g/l
- Remarks regarding safety: Consult Safety Data Sheet and Safety Information printed on the can.
SHELF LIFE
Minimum of 2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5 and 35°C
Made by:
