ZINSSER® ALLCOAT EXTERIOR MATT / 1L

ZINSSER® ALLCOAT EXTERIOR MATT

Developed for the durable decoration of wood, metal, masonry, plastic, concrete and façade
cladding. Self-priming, sanding is unnecessary. Protects dry coating against contamination
by mould. ALLCOAT® Exterior Matt is not a rust inhibitive product, apply only on previously
protected metal.
RECOMMENDED USE
Developed for all outside surfaces, ALLCOAT® Exterior Matt is ideal for use on wood, plastic,
galvanised metal, steel, façade cladding, weathered bitumen, plaster, brick, stone, concrete,
and more. ALLCOAT® Exterior Matt can be used as a primer and adheres directly on existing
glossy coatings without the need for sanding. A separate primer is unnecessary for most
applications. ALLCOAT® Exterior Matt provides superb resistance to cracking, blistering,
flaking, rain, and severe weather conditions.
Two-layer system: The first layer of ALLCOAT® Exterior Matt works as a primer and seals the
surface. The top layer completes the sealing process. Where necessary, apply Zinsser B-I-
N® to bleeding knots and resin streaks. For new or unpainted cedar, redwood, or other
resinous timbers prime with Zinsser Cover Stain®.

REMARKS
ALLCOAT® Exterior Matt is not recommended for use on floors, terraces, or horizontal
surfaces that may be drenched in water or exposed to water for a long period of time. Before
applying ALLCOAT® Exterior Matt, we recommend that you thoroughly sand and degrease
unweathered/new powder coatings and similar surfaces. Not suitable for application onto
newplastisol or a new powder coating. These surfaces must be fully weathered. Not suitable
onto PVDF cladding : apply Rust-Oleum PVDF Primer first. ALLCOAT® Exterior Satin has no
anti corrosive properties, so apply Zinsser® 1-2-3 on bare ferrous metal surfaces. Onto
rusty surfaces, prime with Rust-Oleum® Peganox® or CombiColor® Aqua Primer.

Made by: