- Top quality Primer & Topcoat in 1
- Strong corrosion protection
- High colour retention
Hard Hat® Advanced Primer & Topcoat in 1 Aerosol 2700 are based on a fast drying short oil soya alkyd. The products are based on lead- and chromate free pigments.
RECOMMENDED USE
RUST-OLEUM Hard Hat® Advanced 2700 Primer & Topcoat in 1 should be applied overproperly prepared painted substrates. RUST-OLEUM Hard Hat® Advanced 2700 Primer & Topcoats in 1 is intended for small maintenance jobs or for touch-up. RUST-OLEUM Hard Hat® Advanced 2700 Primer & Topcoat in 1 should be used in light industrial exposures, normal humidity and interior & exterior applications.
TECHNICAL DATA
- Gloss Level: Gloss
- Heat Resistance: 100°C (dry heat), above 65°C discoloration may occur
Product details
- Main Features – 1-component, Primer, Quick drying, Solvent-based, Topcoat
- Content – 500 ml
- Application type – Aerosol
- Substrate – Metal
- Substrate Metal – Aluminium, Bare or blasted metal, Pre Painted metal
- Touch dry – 20 minutes
- Dry to recoat – Within 1 hour or after 48 hours
- VOC level – 640 - 650 g/l
- Theoretical Consumption – 2.5 m² - 3m² per spray
- Color – Gloss flame blue
PRACTICAL CONSUMPTION
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
SURFACE PREPARATION
Remove dirt, grease, oil, loose rust and all other surface contaminants by appropriate means. Sand intact coatings to provide a proper key for adhesion. The surface must be clean and dry during application.
APPLICATION CONDITIONS
For good results the relative humidity shall be below 85% and the temperature of the can above and substrate 0°C.
APPLICATION & THINNING: AEROSOL
Remove cover cap. Shake vigorously for at least one minute after the rattle of mixing ball is heard. Shake frequently during use. Hold can approx. 25 cm from surface. Use back and forth motion keeping can parallel with surface. Ensure that can is in motion when spray button is pressed to avoid runs and sags. Apply several thin layers at a few minutes interval to achieve adequate coating thickness. After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.
SHELF LIFE
Minimum of 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
