Makes the smoothest surface coatable!
- Easy to apply
- Transparent blue finish
- Recoatable after just 30 minutes
- Very high coverage: 4,4 m²/can
DESCRIPTION
RUST-OLEUM® CombiColor Aerosol Tack Coat 3302 is an adhesion coat based on a solvent containing acrylic.
RECOMMENDED USE
RUST-OLEUM CombiColor Aerosol Tack Coat 3302 should be used on galvanized steel, stainless steel, aluminium, copper, glass, porcelain and other smooth, dense surfaces followed by RUST-OLEUM CombiColor Aerosols 7300 Topcoats/ Hammered. RUST-OLEUM CombiColor Aerosol Tack Coat 3302 is intended for small maintenance jobs. RUST-OLEUM CombiColor Aerosol Tack Coat 3302 should be used in light industrial exposures, normal humidity and interior applications.
TECHNICAL DATA
- Density (g/cm³): 0,87
- Solids content in volume: 7%
DRY TIMES BY 20º C/RH 50%
- Touch dry: Remains tacky
- Dry to handle: Remains tacky
- Dry to recoat: After 30 minutes but within 24 hours
THEORETICAL CONSUMPTION
4.4 m² per spray can (400 ml)
PRACTICAL CONSUMPTION
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
SURFACE PREPARATION
Remove dirt, grease, oil and all other surface contaminants by appropriate means or use RUST-OLEUM Alkaline Cleaner/Degreaser ND14. Remove previous coatings completely e.g. with RUST-OLEUM Paint Stripper DK20S. The surface must be clean and dry during application.
DIRECTIONS FOR USE
Remove cover cap. Shake vigorously for at least one minute after the rattle of mixing ball is heard. Shake frequently during use. Hold can at least 25 cm from surface. Use back and forth motion keeping can parallel with surface. Ensure that can is in motion when spray button is pressed to avoid runs and sags. Apply a single, thin layer and avoid application of thick layers. After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.
APPLICATION CONDITIONS
For optimum results the relative humidity shall be below85% and the temperature of the can above 0°C.
APPLICATION & THINNING: BRUSH
Use natural bristles, longhair brushes.
CLEANING OF EQUIPMENT / SPILLS
Use RUST-OLEUM Thinner 160. REMARKS Recoat as soon as possible after 30 minutes to avoid dust/dirt entrapment in the tacky coat.
SAFETY DATA
- VOC level: 730 g/l
- VOC readymix: 741 g/l
- VOC category: A/h
- VOC limit: 750 g/l
- Grenelle: A+
- Remarks regarding safety: Consult Safety Data Sheet and Safety Information printed on the can.
SHELF LIFE
Minimum of 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
