RUST OLEUM Combicolor Metal protection /Hammertone light grey satin 0.750ml 0.75 kg

RUST OLEUM Combicolor Metal Protection /Hammertone light grey satin 0.750ml

• Primer and topcoat in one
• For application on rust, bare metal
• High coverage: 10.3 m² per liter
• Sag-resistant, no brush strokes
• Can be used down to 5°C

DESCRIPTION

RUST-OLEUM® CombiColor Metal 7300/7400 is a primer and topcoat in one, based on a urethane-modified alkyd, providing good drying properties at low temperatures. The product contains anti-rust pigments and is lead and chromate-free.

RECOMMENDED USE

RUST-OLEUM CombiColor Original 7300/7400 should be applied to bare, hand-derusted or CombiPrimer Anti-Corrosion 3369/3380 primed steel. CombiColor Original is designed for brush and roller application and can also be applied by air spray. RUSTOLEUM CombiColor Original 7300/7400 provides corrosion protection in light industrial environments. For metal structures in more aggressive industrial environments, prior application of RUST-OLEUM CombiPrimer Anti-Corrosion 3369/3380 is recommended.

TECHNICAL DATA

• Density (g/cm³): gloss = 0.9-1.10 (black - white), satin = 1.13-1.3 (black - white)
• Gloss level: ["gloss","matt","metallic","satin"]
• Gloss level at 60º: Gloss: 95% satin 30-50%
• Weight solids content: GLOSS 62.5± 3% SATIN: 64± 4% MATT: 73± 2%
• Volume solids content: GLOSS and MATT 53-57%. SATIN 48-52%
• Heat resistance: 90°C (dry heat), discoloration may occur at elevated temperatures.

DRYING TIME AT 20º C/RH 50%

• Touch dry: 2 hours (20°C), 3 hours (10°C), 1 ½ hours (30°C)
• Dry to handle: 8 hours (20°C), 16 hours (10°C), 6 hours (30°C)
• Dry for recoating: 16 hours (20°C), 24 hours (10°C), 8 hours (30°C)
• Full cure: 7 days (20°C), 14 days (10°C), 5 days (30°C)

RECOMMENDED WET FILM THICKNESS 100 µm

RECOMMENDED DRY FILM THICKNESS 55 µm

THEORETICAL COVERAGE 10.3 m²/l at 55 µm dry, depending on color

PRACTICAL COVERAGE Practical coverage depends on many factors such as the porosity and roughness of the substrate and material losses during application.

SURFACE PREPARATION

Remove oil, grease and all other surface contaminants by alkaline cleaning or high-pressure (steam) cleaning in combination with appropriate cleaning agents. Remove mill scale, rust deposits and loose coatings by scraping and wire brushing to St 3 (ISO 8501-1: 1988), light blast cleaning or sanding. Sand intact coatings to slightly roughen the surface. The surface must be clean and dry during application. Galvanized, zinc and aluminum surfaces should first be primed with CombiPrimer Tack Coat 3302.

DIRECTIONS FOR USE To ensure homogeneity, coating materials must be thoroughly stirred before use.

APPLICATION CONDITIONS Air, substrate and coating material temperature between 5° and 35°C and relative humidity below 85%. The substrate temperature must be at least 3°C above the dew point.

APPLICATION AND THINNING: BRUSH Up to 10% by volume RUST-OLEUM Thinner 7301. Use natural hair, long-bristle brushes.

APPLICATION AND THINNING: ROLLER Up to 10% by volume RUST-OLEUM Thinner 7301. Use polyamide 6-12 mm short-nap rollers. Roller application may require 2 coats to achieve the recommended dry film thickness.

APPLICATION AND THINNING: AIR SPRAY 10-25% RUST-OLEUM Thinner 7301. Gravity cup and pressure cup. Tip size: 1.0 - 1.5 mm. Atomizing pressure: 2 - 4 bar.

EQUIPMENT CLEANING / SPILLS Use RUST-OLEUM Thinner 7301 or RUST-OLEUM Thinner 160.

NOTES Maximum dry film thickness per coat: 75 µm dry, equal to 135 µm wet. To avoid a non-homogeneous appearance with aluminum coatings, it is recommended to spray 7311 with HVLP. CombiColor Metal 7300/7400 can be recoated with 7300 Aerosols within 4 hours or after 72 hours.

SAFETY DATA

• VOC level: 477 g/l
• VOC ready mix: 477 g/l
• VOC category: A/i
• VOC limit: 500 g/l
• Safety notes: See safety data sheet and safety information printed on the can.

SHELF LIFE Minimum 5 years from date of manufacture in unopened cans, if stored in dry, well-ventilated areas, away from direct sunlight at temperatures between 5° and 35°C.

Application steps:

– 1st step - Wire brush to remove loosely adhering particles
– 2nd step - Degrease and clean with Combi Color thinner
– 3rd step - Stir the paint very well
– 4th step - Paint 2 coats after approximately 16 hours (depending on air temperature) 16 hours (20°C), 24 hours (10°C), 8 hours (30°C)

RUST OLEUM Combicolor Colors:

Manufactured by: