Безплатна доставка на поръчки над 300 лева

  • 14 Дни Право на Връщане

  • Сигурна Доставка

  • Вземи на Изплащане

  • Проверка на Пратката

RUST OLEUM Cold Galvanizing compound spray 500ml

Rust-Oleum  |  SKU: 2185

Regular price 53.60 лв

💡 Важно е да знаете:

Продуктите в кошницата не се резервират автоматично. Поради динамична наличност е възможно някои артикули да се изчерпят, преди да започнем обработката.
Ако това се случи, ще ви уведомим веднага щом поръчката ви влезе в обработка.

RUST OLEUM Cold Galvanizing compound spray 500ml

  • Cathodic protection of bare and galvanised steel
  • 90% pure zinc in dry paint film
  • Resists 500 hours of salt spray testing (DIN 50021 SS)
  • To recoat within one hour
  • To recoat with HARD HAT® metallic sprays

Hard Hat Aerosol Zinc Cold Galvanising Compound  is a fast drying zinc rich primer based on an epoxy ester resin. The product contains pure zinc as pigment and provides cathodic protection.

  • Gloss Level – Matt
  • Content –  500ml
  • Application type – Aerosol, Brush
  • Substrate – Metal
  • Substrate Metal – Bare or blasted metal, Galvanised steel
  • Touch dry – 10 minutes
  • Dry to recoat – Within 1 hour or after 48 hours
  • VOC level – 630 g/l

DESCRIPTION

Hard Hat Aerosol Zinc Cold Galvanising Compound 2185 is a fast drying zinc rich primer based on an epoxy ester resin. The product contains pure zinc as pigment and provides cathodic protection.

RECOMMENDED USE

Zinc should be used on new, bare steel or galvanised steel surfaces. RUST-OLEUM Zinc is intended to be applied on small areas or for touch-up. RUST-OLEUM Zinc can be recoated with non-saponifiable coatings. RUST-OLEUM Zinc should be used as a primer or as a single coat in light industrial exposures, corrosive environments and high humidity areas.

TECHNICAL DATA

  • Gloss Level: Matt
  • Heat Resistance: 450°C (dry heat)

DRY TIMES BY 20º C/RH 50%

  • Touch dry: 10 minutes
  • Dry to handle: 30 minutes
  • Dry to recoat: Within 1 hour or after 48 hours
  • Fully cured: 7 days

RECOMMENDED WET FILM THICKNESS – 100 µm

RECOMMENDED DRY FILM THICKNESS – 35 µm

THEORETICAL CONSUMPTION  1,4 m² per spray can 

PRACTICAL CONSUMPTION Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.

SURFACE PREPARATION Remove dirt, grease, oil, loose rust and all other surface contaminants by appropriate means. The surface must be clean and dry during application.

APPLICATION CONDITIONS For good results the relative humidity shall be below 85% and the temperature of the can and substrate above 0°C.

SAFETY DATA

  • VOC level: 630 g/l
  • Remarks regarding safety: Consult Safety Data Sheet and Safety Information printed on the can.

SHELF LIFE

Minimum of 3 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.

 

Made by:

  • ПЛАЩАНЕ ПРИ ДОСТАВКА

  • 14 ДНИ ПРАВО НА ВРЪЩАНЕ

  • СИГУРНА ДОСТАВКА

  • ВЗЕМИ НА ИЗПЛАЩАНЕ

  • ПРОВЕРКА НА ПРАТКАТА