NOXYDE Tape 10cmX10m. 0.2 kg

NOXYDE Tape 10cmх10m.

• Easy to apply
• Excellent adhesive properties
• Excellent heat stability
• Excellent adhesion at low temperatures
• High plasticity and formability

Noxyde Tape is a self-adhesive tape made of a butyl rubber compound protected by a Fleece in Polypropylene.

Product details:

SKU: RL10

Substrate: Metal Cladding

Substrate Metal Cladding: Bare or blasted metal

 

RECOMMENDED USE: Reinforcement of overlaps of metal cladding roof and wall panels in combination with the Noxyde and Noxyde Pegarust coating system.

• Tensile Strength: Long.>100 N/50 mm | Trasv.> 100 N/50 mm
• Flexural Strength: Long.>70% | Trasv>70%

DIRECTIONS FOR USE:
Apply Noxyde Tape centrally over the joint detail, pressing firmly into the profile of the panel avoiding stretching, tenting or creation of any air pockets. Ensure that the Noxyde Tape is well adhered to both surfaces. Ensure all applied Noxyde Tape is coated within the sameworking day with one coat of Noxyde (grey shade) at an approximate theoretical coverage rate of 400 gms per square metre, sufficient to provide a dry film build of 175 microns (= approximately 320 microns wet film). Allowto dry for a minimum period of 24 hours at 20°C before applying any.

REMARKS:
Dimensions: roll length : 10 meters
Dimensions: width : 100 mm

TECHNICAL DATA:

Made by: