MELLERUD Mould Remover 500 ml 0.5 kg

MELLERUD Mould Remover 500 ml has an immediate effect on all washable surfaces in the bathroom, house, sauna, swimming pool, and others. It destroys mold, fungi, mildew, and bacteria on tiles, grouting, ceilings, walls, masonry, wood, and plastic. It intensely cleans and disinfects with the help of chlorine substances. 500 ml is sufficient for 8 m².

Instructions for use

How to properly use MELLERUD Mould Remover Plus with active chlorine 0.5 L

1. Spray the product directly onto the mold from a distance of approximately 15 cm.
2. Allow to act for approximately 60 minutes.
3. Then wipe with water or a damp cloth.
4. Ensure good ventilation during and after use.

More about the product

MELLERUD Mould Remover Plus with active chlorine is particularly effective against various types of mold, mildew, and dirt caused by moisture.

The product is also suitable for combating fungi and bacteria. Thanks to its active chlorine-based formula, it bleaches mold-affected surfaces and helps to deeply remove stains.

In addition to cleaning, the product disinfects treated surfaces and helps eliminate harmful microorganisms.

The special foam makes the product very convenient to use on vertical surfaces and ceilings. It is applied precisely, adheres longer to the surface, and thus works more effectively where ordinary liquid detergents quickly run off.

MELLERUD Mould Remover Plus with active chlorine can be used on many surfaces in the home. It is particularly suitable for hard surfaces in the bathroom, as well as for tiles, grouting, walls, ceilings, masonry, wood, silicone seals, and plastics.

Don't give mold a chance. Protect your health and your family's peace of mind with MELLERUD Mould Remover Plus with active chlorine.

Frequently asked questions

How do I remove mold from silicone joints?
Mold on silicone, rubber, and acrylic is difficult to remove because these materials often retain moisture and allow mold to penetrate deeply.

MELLERUD Mould Remover with active chlorine removes mold from the surface and bleaches black spots, so the result is visible quickly.

Important to know: if the mold has penetrated deep into the silicone, the effect may be temporary. In such cases, the safest solution is to replace the silicone joint.

How do I remove the smell of the product?
After use, wash the treated surface thoroughly with water. Ventilate the room well.

Heat helps the chlorine smell dissipate faster. If necessary, you can carefully use a hairdryer to speed up the process.

Is the product harmful to health?
When used according to the instructions and warnings on the label, no harmful effects on health are expected.

Always use the product carefully, ventilate the room, and avoid contact with skin, eyes, and clothing.

How much area does one package cover?
A 500 ml package is sufficient for up to 8 m².

Caution: Use biocidal products carefully. Always read the label and product information before use.

.